ORIGINAL_ARTICLE
Synthesis polyurethane closed cell foam via chemical method
Introduction: Possibly the most important class of polymeric foams are polyurethane foams (PUFs), as their thermal conductivity and low density combined with their interesting mechanical properties make them excellent thermal and sound insulators, as well as structural and comfort materials. Objective: In this study, we demonstrate synthesis polyurethane closed cell foam via a simple chemical method. Material and Methods: The chemicals used in the study included polyol, foaming agent, silicon oil, and other additives. Characterization methods included X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), elemental map, and Fourier transform infrared spectroscopy (FTIR). Result: The results of the analysis showed that the obtained foams were successfully synthesized. The cells in these foams were mostly closed, and were micrometric in size. Trace elements were homogeneously distributed in synthesized foams. Conclusion: The results of this study are expected to be useful for the engineering application of this type of foam.
https://www.jourtm.com/article_110062_d41d8cd98f00b204e9800998ecf8427e.pdf
2020-06-01
10.22034/jtm.2020.238525.1027
Polyurethane
Closed cell foam
Chemical Method
Synthesis
Mohammad Reza
Gharabeik
mrgh@alum.sharif.edu
1
Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran
AUTHOR
Hassan
Nosrati
h.nosrati@modares.ac.ir
2
Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran
LEAD_AUTHOR
Amir Hossein
Ahmadi
a.hosseinahmadi@gmail.com
3
Department of Basic Science, Shahed University, Tehran, Iran
AUTHOR
1- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, A.H. Ahmadi, M.C. Perez, C.E. Bünger, Statistical evaluation of nano-structured hydroxyapatite mechanical characteristics by employing the Vickers indentation technique, Ceramics International 46(12) (2020) 20081-20087, https://doi.org/10.1016/j.ceramint.2020.05.082
1
2- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, M.C. Perez, C.E. Bünger, Evaluation of Argon-Gas-Injected Solvothermal Synthesis of Hydroxyapatite Crystals Followed by High-Frequency Induction Heat Sintering, Crystal Growth & Design 20(5) (2020) 3182–3189, https://doi.org/10.1021/acs.cgd.0c00048
2
3- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, C.E. Bünger, Enhanced fracture toughness of three dimensional graphene- hydroxyapatite nanocomposites by employing the Taguchi method, Composites Part B: Engineering 190 (2020) 107928, https://doi.org/10.1016/j.compositesb.2020.107928
3
4- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, R.Z. Emameh, M.C. Perez, C.E. Bünger, Improving the mechanical behavior of reduced graphene oxide/hydroxyapatite nanocomposites using gas injection into powders synthesis autoclave, Scientific Reports 10 (2020) 8552, https://doi.org/10.1038/s41598-020-64928-y
4
5- H. Nosrati, D.Q.S. Le, R.Z. Emameh, M.C. Perez, C.E. Bünger, Nucleation and growth of brushite crystals on the graphene sheets applicable in bone cement, Boletín de la Sociedad Española de Cerámica y Vidrio (2020), https://doi.org/10.1016/j.bsecv.2020.05.001
5
6- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, A.H. Ahmadi, M.C. Perez, C.E. Bünger, Investigating the mechanical behavior of hydroxyapatite-reduced graphene oxide nanocomposite under different loading rates, Nano Express 1(1) (2020) 010053, https://doi.org/10.1088/2632-959X/ab98e2
6
7- H. Nosrati, R. Sarraf Mamoory, D.Q.S. Le, C.E. Bünger, R.Z. Emameh, F. Dabir, Gas injection approach for synthesis of hydroxyapatite nanorods via hydrothermal method, Materials Characterization 159 (2020) 110071, https://doi.org/10.1016/j.matchar.2019.110071
7
8- H. Nosrati, R. Sarraf-Mamoory, A.H. Ahmadi, M.C. Perez, Synthesis of Graphene Nanoribbons–Hydroxyapatite Nanocomposite Applicable in Biomedicine and Theranostics, Journal of Nanotheranostics 1(1) (2020) 6-18, https://doi.org/10.3390/jnt1010002
8
9- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, C.E. Bünger, Fabrication of gelatin/hydroxyapatite/3D-graphene scaffolds by a hydrogel 3D-printing method, Materials Chemistry and Physics 239 (2020) 122305, https://doi.org/10.1016/j.matchemphys.2019.122305
9
10- H. Nosrati, R. Sarraf-Mamoory, A.H. Ahmadi, D.Q.S. Le, M.C. Perez, C.E. Bünger, Effect of hydrogen gas pressure on the mechanical properties of reduced graphene oxide-HA nanocomposites, Journal of Tissues and Materials 3(1) 21-30, DOI: 10.22034/JTM.2020.219321.1025
10
11- R.Z. Emameh, H. Nosrati, R.A. Taheri, Combination of Biodata Mining and Computational Modelling in Identification and Characterization of ORF1ab Polyprotein of SARS-CoV-2 Isolated from Oronasopharynx of an Iranian Patient, Biological Procedures Online 22 (2020) 8, https://doi.org/10.1186/s12575-020-00121-9
11
12- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, M.C. Perez, C.E. Bünger, Physical evaluation of 3D-printed gelatin-hydroxyapatite-reduced graphene oxide nanocomposite as a bone tissue engineering scaffold, Journal of Tissues and Materials 3(1) 1-11, DOI: 10.22034/JTM.2020.218433.1024
12
13- R.Z. Emameh, M. Kuuslahti, H. Nosrati, H. Lohi, S. Parkkila, Assessment of databases to determine the validity of β- and γ-carbonic anhydrase sequences from vertebrates, BMC Genomics 21 (2020) 352, https://doi.org/10.1186/s12864-020-6762-2
13
14- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, M.C. Perez, C.E. Bünger, Studying the physical behavior of human mesenchymal stem cells on the surface of hydroxyapatite after adding graphene as a reinforcement, Journal of Bioengineering Research 2(1) 1-10, DOI: 10.22034/JBR.2019.213164.1018
14
15- H. Nosrati, R. Sarraf-Mamoory, F. Dabir, D.Q.S. Le, C.E. Bünger, M.C. Perez, M.A. Rodriguez, Effects of hydrothermal pressure on in situ synthesis of 3D graphene/hydroxyapatite nano structured powders, Ceramics International 45 (2019) 1761–1769, https://doi.org/10.1016/j.ceramint.2018.10.059
15
16- A.H. Ahmadi, H. Nosrati, R. Sarraf-Mamoory, Decreasing β- three calcium phosphate particle size using graphite as nucleation sites and diethylene glycol as a chemical additive, Journal of Bioengineering Research 1(4) (2019), DOI:10.22034/JBR.2019.211371.1016
16
17- H. Nosrati, R. Sarraf-Mamoory, F. Dabir, M.C. Perez, M.A. Rodriguez, D.Q.S. Le, C.E. Bünger, In situ synthesis of three dimensional graphene/hydroxyapatite nano powders via hydrothermal process, Materials Chemistry and Physics 222 (2019) 251–255, https://doi.org/10.1016/j.matchemphys.2018.10.023
17
18- H. Nosrati, R. Sarraf-Mamoory, F. Dabir, Crystallographic study of hydrothermal synthesis of hydroxyapatite nano-rods using Brushite precursors, Journal of Tissues and Materials 2 (3) (2019) 1-8, DOI: 10.22034/jtm.2019.199830.1022
18
19- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, C.E. Bünger, Preparation of reduced graphene oxide/hydroxyapatite nanocomposite and evaluation of graphene sheets/hydroxyapatite interface, Diamond & Related Materials 100 (2019) 107561, https://doi.org/10.1016/j.diamond.2019.107561
19
20- H. Nosrati, D.Q.S. Le, R.Z. Emameh, C.E. Bünger, Characterization of the precipitated Dicalcium Phosphate Dehydrate on the Graphene Oxide surface as a bone cement reinforcement, Journal of Tissues and Materials 2 (1) (2019) 33-46, DOI: 10.22034/jtm.2019.173565.1013
20
21- H. Nosrati, N. Ehsani, H. Baharvandi, M. Mohtashami, H. Abdizadeh, V. Mazinani, Effect of primary materials ratio and their stirring time on SiC nanoparticle production efficiency through sol-gel process, American Journal of Engineering Research (AJER) 2014; 3(3): 317-321.
21
22- H. Nosrati, M.S. Hosseini, M. Nemati, A. Samariha, Production of TiO2 Nano-Rods Using Combination of Sol-Gel and Electrophoretic Methods, Asian Journal of Chemistry 2013; 25(6): 3484-3486, http://dx.doi.org/10.14233/ajchem.2013.14250
22
23- A. Samariha, A. Bastani, M. Nemati, M. Kiaei, H. Nosrati, M. Farsi, Investigation of the mechanical properties of Bagasse Flour/Polypropylene composites, Mechanics of Composite Materials 2013; 49(4): 447-454, DOI: 10.1007/s11029-013-9361-3
23
24- H. Nosrati, S.H. Tabaian, H. Baharvandi, M. Nemati, A. Samariha, Effect of Nickel Pulse Electroplating Parameters on ST12 Steel, Middle-East Journal of Scientific Research 2012; 12(9): 1288-1291, DOI: 10.5829/idosi.mejsr.2012.12.9.367
24
25- H. Nosrati, N. Ehsani, M. Nemati, A. Samariha, Changing pH to improve efficiency of SiC nano-particles produced by chemical method, Middle-East Journal of Scientific Research 2012; 12(9): 1250-1253, DOI: 10.5829/idosi.mejsr.2012.12.9.366
25
26- A. Samariha, M. Nemati, M. Kiaei, H. Nosrati, F. Ravanbakhsh, Investigation on physical properties of a composite made from Bagasse Flour and recycled high density Polyethylene, American-Eurasian J. Agric. & Environ. Sci. 2012; 12(2): 164-166.
26
27- A. Samariha, M. Talaeipour, M. Nemati, M. Kiaei, F. Ravanbakhsh, H. Nosrati, H. Chitsazi, Effective factors on creating job motivation among faculty members of wood and paper industry groups, J. Basic. Appl. Sci. Res. 2012; 2(2): 1672-1677.
27
28- J.E. Kasmani, A. Samariha, M. Nemati, H. Nosrati, F. Ravanbakhsh, H. Chitsazi, Evaluating the effect of photo-aging on brightness property of Soda paper produced from Bagasse, J. Basic. Appl. Sci. Res. 2012; 2(5): 4658-4660.
28
29- J.E. Kasmani, M. Nemati, A. Samariha, H. Chitsazi, N.S. Mohammadi, H. Nosrati, Studying the effect of the age in Eucaliptus camaldulensis species on wood chemical compounds used in pulping process, American-Eurasian J. Agric. & Environ. Sci. 2011; 11(6): 854-856.
29
30- M. Mazloumpour, F. Rahmani, N. Ansari, H. Nosrati, A.H. Rezaei, Study of wicking behavior of water on woven fabric using magnetic induction technique, The journal of the textile institute 2011; 102(7): 559-567, http://dx.doi.org/10.1080/00405000902952200
30
ORIGINAL_ARTICLE
Preparation and characterization of SiC/SiO2 coating by a sol–gel method
Introduction: There are different methods of coating. Depending on the benefits and limitations of each, one method will be optimal. Objective: The aim of this study is to synthesis SiC-SiO2 coatings with different percentages of SiO2 and SiC. Material and Methods: By changing the parameters affecting the sol, the percentage of SiO2 and SiC in the coating is adjusted to optimize the mechanical properties such as hardness and wear resistance. The morphology of the coating is examined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Result: Suspensions prepared in an acidic environment are rapidly agglomerated and practically cannot be coated. Suspensions prepared in a neutral environment also settle after a very short time. However, the suspensions and colloids prepared in the alkaline environment have a relatively high stability. Therefore, it can be conclude that pH is the main variable of coating process. Conclusion: The results of this study are expected to be useful for the engineering application of this type of coating.
https://www.jourtm.com/article_110063_d41d8cd98f00b204e9800998ecf8427e.pdf
2020-06-01
10.22034/jtm.2020.238535.1028
SiC/SiO2
Sol–Gel
coating
Synthesis
Mohammad Reza
Gharabeik
mrgh@alum.sharif.edu
1
Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran
AUTHOR
Hassan
Nosrati
h.nosrati@modares.ac.ir
2
Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran
LEAD_AUTHOR
Amir Hossein
Ahmadi
a.hosseinahmadi@gmail.com
3
Department of Basic Science, Shahed University, Tehran, Iran
AUTHOR
1- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, A.H. Ahmadi, M.C. Perez, C.E. Bünger, Statistical evaluation of nano-structured hydroxyapatite mechanical characteristics by employing the Vickers indentation technique, Ceramics International 46(12) (2020) 20081-20087, https://doi.org/10.1016/j.ceramint.2020.05.082
1
2- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, M.C. Perez, C.E. Bünger, Evaluation of Argon-Gas-Injected Solvothermal Synthesis of Hydroxyapatite Crystals Followed by High-Frequency Induction Heat Sintering, Crystal Growth & Design 20(5) (2020) 3182–3189, https://doi.org/10.1021/acs.cgd.0c00048
2
3- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, C.E. Bünger, Enhanced fracture toughness of three dimensional graphene- hydroxyapatite nanocomposites by employing the Taguchi method, Composites Part B: Engineering 190 (2020) 107928, https://doi.org/10.1016/j.compositesb.2020.107928
3
4- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, R.Z. Emameh, M.C. Perez, C.E. Bünger, Improving the mechanical behavior of reduced graphene oxide/hydroxyapatite nanocomposites using gas injection into powders synthesis autoclave, Scientific Reports 10 (2020) 8552, https://doi.org/10.1038/s41598-020-64928-y
4
5- H. Nosrati, D.Q.S. Le, R.Z. Emameh, M.C. Perez, C.E. Bünger, Nucleation and growth of brushite crystals on the graphene sheets applicable in bone cement, Boletín de la Sociedad Española de Cerámica y Vidrio (2020), https://doi.org/10.1016/j.bsecv.2020.05.001
5
6- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, A.H. Ahmadi, M.C. Perez, C.E. Bünger, Investigating the mechanical behavior of hydroxyapatite-reduced graphene oxide nanocomposite under different loading rates, Nano Express 1(1) (2020) 010053, https://doi.org/10.1088/2632-959X/ab98e2
6
7- H. Nosrati, R. Sarraf Mamoory, D.Q.S. Le, C.E. Bünger, R.Z. Emameh, F. Dabir, Gas injection approach for synthesis of hydroxyapatite nanorods via hydrothermal method, Materials Characterization 159 (2020) 110071, https://doi.org/10.1016/j.matchar.2019.110071
7
8- H. Nosrati, R. Sarraf-Mamoory, A.H. Ahmadi, M.C. Perez, Synthesis of Graphene Nanoribbons–Hydroxyapatite Nanocomposite Applicable in Biomedicine and Theranostics, Journal of Nanotheranostics 1(1) (2020) 6-18, https://doi.org/10.3390/jnt1010002
8
9- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, C.E. Bünger, Fabrication of gelatin/hydroxyapatite/3D-graphene scaffolds by a hydrogel 3D-printing method, Materials Chemistry and Physics 239 (2020) 122305, https://doi.org/10.1016/j.matchemphys.2019.122305
9
10- H. Nosrati, R. Sarraf-Mamoory, A.H. Ahmadi, D.Q.S. Le, M.C. Perez, C.E. Bünger, Effect of hydrogen gas pressure on the mechanical properties of reduced graphene oxide-HA nanocomposites, Journal of Tissues and Materials 3(1) 21-30, DOI: 10.22034/JTM.2020.219321.1025
10
11- R.Z. Emameh, H. Nosrati, R.A. Taheri, Combination of Biodata Mining and Computational Modelling in Identification and Characterization of ORF1ab Polyprotein of SARS-CoV-2 Isolated from Oronasopharynx of an Iranian Patient, Biological Procedures Online 22 (2020) 8, https://doi.org/10.1186/s12575-020-00121-9
11
12- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, M.C. Perez, C.E. Bünger, Physical evaluation of 3D-printed gelatin-hydroxyapatite-reduced graphene oxide nanocomposite as a bone tissue engineering scaffold, Journal of Tissues and Materials 3(1) 1-11, DOI: 10.22034/JTM.2020.218433.1024
12
13- R.Z. Emameh, M. Kuuslahti, H. Nosrati, H. Lohi, S. Parkkila, Assessment of databases to determine the validity of β- and γ-carbonic anhydrase sequences from vertebrates, BMC Genomics 21 (2020) 352, https://doi.org/10.1186/s12864-020-6762-2
13
14- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, M.C. Perez, C.E. Bünger, Studying the physical behavior of human mesenchymal stem cells on the surface of hydroxyapatite after adding graphene as a reinforcement, Journal of Bioengineering Research 2(1) 1-10, DOI: 10.22034/JBR.2019.213164.1018
14
15- H. Nosrati, R. Sarraf-Mamoory, F. Dabir, D.Q.S. Le, C.E. Bünger, M.C. Perez, M.A. Rodriguez, Effects of hydrothermal pressure on in situ synthesis of 3D graphene/hydroxyapatite nano structured powders, Ceramics International 45 (2019) 1761–1769, https://doi.org/10.1016/j.ceramint.2018.10.059
15
16- A.H. Ahmadi, H. Nosrati, R. Sarraf-Mamoory, Decreasing β- three calcium phosphate particle size using graphite as nucleation sites and diethylene glycol as a chemical additive, Journal of Bioengineering Research 1(4) (2019), DOI:10.22034/JBR.2019.211371.1016
16
17- H. Nosrati, R. Sarraf-Mamoory, F. Dabir, M.C. Perez, M.A. Rodriguez, D.Q.S. Le, C.E. Bünger, In situ synthesis of three dimensional graphene/hydroxyapatite nano powders via hydrothermal process, Materials Chemistry and Physics 222 (2019) 251–255, https://doi.org/10.1016/j.matchemphys.2018.10.023
17
18- H. Nosrati, R. Sarraf-Mamoory, F. Dabir, Crystallographic study of hydrothermal synthesis of hydroxyapatite nano-rods using Brushite precursors, Journal of Tissues and Materials 2 (3) (2019) 1-8, DOI: 10.22034/jtm.2019.199830.1022
18
19- H. Nosrati, R. Sarraf-Mamoory, D.Q.S. Le, C.E. Bünger, Preparation of reduced graphene oxide/hydroxyapatite nanocomposite and evaluation of graphene sheets/hydroxyapatite interface, Diamond & Related Materials 100 (2019) 107561, https://doi.org/10.1016/j.diamond.2019.107561
19
20- H. Nosrati, D.Q.S. Le, R.Z. Emameh, C.E. Bünger, Characterization of the precipitated Dicalcium Phosphate Dehydrate on the Graphene Oxide surface as a bone cement reinforcement, Journal of Tissues and Materials 2 (1) (2019) 33-46, DOI: 10.22034/jtm.2019.173565.1013
20
21- H. Nosrati, N. Ehsani, H. Baharvandi, M. Mohtashami, H. Abdizadeh, V. Mazinani, Effect of primary materials ratio and their stirring time on SiC nanoparticle production efficiency through sol-gel process, American Journal of Engineering Research (AJER) 2014; 3(3): 317-321.
21
22- H. Nosrati, M.S. Hosseini, M. Nemati, A. Samariha, Production of TiO2 Nano-Rods Using Combination of Sol-Gel and Electrophoretic Methods, Asian Journal of Chemistry 2013; 25(6): 3484-3486, http://dx.doi.org/10.14233/ajchem.2013.14250
22
23- A. Samariha, A. Bastani, M. Nemati, M. Kiaei, H. Nosrati, M. Farsi, Investigation of the mechanical properties of Bagasse Flour/Polypropylene composites, Mechanics of Composite Materials 2013; 49(4): 447-454, DOI: 10.1007/s11029-013-9361-3
23
24- H. Nosrati, S.H. Tabaian, H. Baharvandi, M. Nemati, A. Samariha, Effect of Nickel Pulse Electroplating Parameters on ST12 Steel, Middle-East Journal of Scientific Research 2012; 12(9): 1288-1291, DOI: 10.5829/idosi.mejsr.2012.12.9.367
24
25- H. Nosrati, N. Ehsani, M. Nemati, A. Samariha, Changing pH to improve efficiency of SiC nano-particles produced by chemical method, Middle-East Journal of Scientific Research 2012; 12(9): 1250-1253, DOI: 10.5829/idosi.mejsr.2012.12.9.366
25
26- A. Samariha, M. Nemati, M. Kiaei, H. Nosrati, F. Ravanbakhsh, Investigation on physical properties of a composite made from Bagasse Flour and recycled high density Polyethylene, American-Eurasian J. Agric. & Environ. Sci. 2012; 12(2): 164-166.
26
27- A. Samariha, M. Talaeipour, M. Nemati, M. Kiaei, F. Ravanbakhsh, H. Nosrati, H. Chitsazi, Effective factors on creating job motivation among faculty members of wood and paper industry groups, J. Basic. Appl. Sci. Res. 2012; 2(2): 1672-1677.
27
28- J.E. Kasmani, A. Samariha, M. Nemati, H. Nosrati, F. Ravanbakhsh, H. Chitsazi, Evaluating the effect of photo-aging on brightness property of Soda paper produced from Bagasse, J. Basic. Appl. Sci. Res. 2012; 2(5): 4658-4660.
28
29- J.E. Kasmani, M. Nemati, A. Samariha, H. Chitsazi, N.S. Mohammadi, H. Nosrati, Studying the effect of the age in Eucaliptus camaldulensis species on wood chemical compounds used in pulping process, American-Eurasian J. Agric. & Environ. Sci. 2011; 11(6): 854-856.
29
30- M. Mazloumpour, F. Rahmani, N. Ansari, H. Nosrati, A.H. Rezaei, Study of wicking behavior of water on woven fabric using magnetic induction technique, The journal of the textile institute 2011; 102(7): 559-567, http://dx.doi.org/10.1080/00405000902952200
30
ORIGINAL_ARTICLE
3D bioprinting for bone tissues: materials and design
https://www.jourtm.com/article_110068_d41d8cd98f00b204e9800998ecf8427e.pdf
2020-06-01
10.22034/jtm.2020.110068
ORIGINAL_ARTICLE
Fabricating Polyethylene oxide (PEO) Nanofiber Scaffolds with Different Molecular Weight for Viral Infection Diseases
Recently, a novel dosage form topical vaginal delivery has been developed utilizing drug-fibers fabricated by electrospinning. Biocompatible and biodegradable nanofiber meshes suitable for drug delivery systems were electrospun based on poly (ethylene oxide) (PEO) with high molecular weight (HMW) and low molecular weight (LMW) to design innovative vaginal delivery systems. It is desirable to encapsulate a drug inside the fibers to enhance the drug antiviral activity in addition to controlling the fiber diameter. The surface morphology and average diameter of the nanofibers were determined by field emission scanning electron microscopy (FE-SEM). Based on SEM results it was revealed that the HMW PEO has more uniform nanofibers with good average diameters than LMW PEO. We formulated acyclovir (ACV) at 20 wt% into electrospun solid dispersions construct from PEO nanofibers and examined distribution in characterizing drug release rates into aqueous media. We assumed that ACV-loaded PEO nanofiber scaffolds were prepared using electrospinning when applied to vaginal environment, should remain undamaged as long as the environment is acidic.
https://www.jourtm.com/article_120848_d41d8cd98f00b204e9800998ecf8427e.pdf
2020-06-01
10.22034/jtm.2020.120848
Nanofibers
Scaffolds
Electrospinning
Poly (ethylene oxide)
high molecular weight (HMW)
low molecular weight (LMW)
Acyclovir (ACV)
Elnaz
Ahani
1
Department of Nanoengineering, Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University
LEAD_AUTHOR
Masumeh
Dodel
2
Medical Biotechnology Research Center, Paramedicine Faculty, Guilan University of Medical Sciences, Rasht, Iran
AUTHOR
[1] B. Pant, M. Park, S.-J. Park, Drug delivery applications of core-sheath nanofibers prepared by coaxial electrospinning: a review, Pharmaceutics. 11 (2019) 305.
1
[2] S. Kajdič, O. Planinšek, M. Gašperlin, P. Kocbek, Electrospun nanofibers for customized drug-delivery systems, J. Drug Deliv. Sci. Technol. 51 (2019) 672–681.
2
[3] R. Contreras-Cáceres, L. Cabeza, G. Perazzoli, A. Díaz, J.M. López-Romero, C. Melguizo, J. Prados, Electrospun nanofibers: Recent applications in drug delivery and cancer therapy, Nanomaterials. 9 (2019) 656.
3
[4] A. Aidun, A. Zamanian, F. Ghorbani, Immobilization of polyvinyl alcohol‐siloxane on the oxygen plasma‐modified polyurethane‐carbon nanotube composite matrix, J. Appl. Polym. Sci. 137 (2020) 48477.
4
[5] C.P. Barnes, S.A. Sell, E.D. Boland, D.G. Simpson, G.L. Bowlin, Nanofiber technology: designing the next generation of tissue engineering scaffolds, Adv. Drug Deliv. Rev. 59 (2007) 1413–1433.
5
[6] N. Bhardwaj, S.C. Kundu, Electrospinning: a fascinating fiber fabrication technique, Biotechnol. Adv. 28 (2010) 325–347.
6
[7] A. Keirouz, M. Chung, J. Kwon, G. Fortunato, N. Radacsi, 2D and 3D electrospinning technologies for the fabrication of nanofibrous scaffolds for skin tissue engineering: A review, Wiley Interdiscip. Rev. Nanomedicine Nanobiotechnology. 12 (2020) e1626.
7
[8] D. Liang, B.S. Hsiao, B. Chu, Functional electrospun nanofibrous scaffolds for biomedical applications, Adv. Drug Deliv. Rev. 59 (2007) 1392–1412.
8
[9] F. Ghorbani, A. Zamanian, A. Aidun, Bioinspired polydopamine coating‐assisted electrospun polyurethane‐graphene oxide nanofibers for bone tissue engineering application, J. Appl. Polym. Sci. 136 (2019) 47656.
9
[10] A. Safaei Firoozabady, A. Aidun, R. Kowsari-Esfahan, A. Allahyari, Characterization and evaluation of graphene oxide incorporated into nanofibrous Scaffold for bone tissue engineering, J. Tissues Mater. 2 (2019) 1–13.
10
[11] F.S. Hosseini, F. Soleimanifar, A. Aidun, S.E. Enderami, E. Saburi, H.Z. Marzouni, M. Khani, A. Khojasteh, A. Ardeshirylajimi, Poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) improved osteogenic differentiation of the human induced pluripotent stem cells while considered as an artificial extracellular matrix, J. Cell. Physiol. 234 (2019) 11537–11544.
11
[12] S. Sabra, D.M. Ragab, M.M. Agwa, S. Rohani, Recent advances in electrospun nanofibers for some biomedical applications, Eur. J. Pharm. Sci. 144 (2020) 105224.
12
[13] Ş.M. Eskitoros-Togay, Y.E. Bulbul, S. Tort, F.D. Korkmaz, F. Acartürk, N. Dilsiz, Fabrication of doxycycline-loaded electrospun PCL/PEO membranes for a potential drug delivery system, Int. J. Pharm. 565 (2019) 83–94.
13
[14] D. Taylor-Robinson, P. Horner, A. Pallecaros, Diagnosis of some genital-tract infections: part 2. Molecular tests and the new challenges, Int. J. STD AIDS. 31 (2020) 198–207.
14
[15] K.J. Looker, N.J. Welton, K.M. Sabin, S. Dalal, P. Vickerman, K.M.E. Turner, M.-C. Boily, S.L. Gottlieb, Global and regional estimates of the contribution of herpes simplex virus type 2 infection to HIV incidence: a population attributable fraction analysis using published epidemiological data, Lancet Infect. Dis. 20 (2020) 240–249.
15
[16] K. Kłysik, A. Pietraszek, A. Karewicz, M. Nowakowska, Acyclovir in the treatment of herpes viruses–a review, Curr. Med. Chem. (2020).
16
[17] E. Ahani, A. Aidun, Neurological toxicity of nanomaterials in the brain: Hazard effects of these materials in the central nervous system, J. Bioeng. Res. 1 (2019) 38–44. https://doi.org/10.22034/jbr.2019.97271.
17
[18] E. Ahani, M. Montazer, T. Toliyat, M. Mahmoudi Rad, A novel biocompatible antibacterial product: Nanoliposomes loaded with poly(hexamethylene biguanide chloride), J. Bioact. Compat. Polym. 32 (2017). https://doi.org/10.1177/0883911516675367.
18
[19] E. Ahani, M. Montazer, T. Toliyat, M. Mahmoudi Rad, T. Harifi, Preparation of nano cationic liposome as carrier membrane for polyhexamethylene biguanide chloride through various methods utilizing higher antibacterial activities with low cell toxicity, J. Microencapsul. 34 (2017). https://doi.org/10.1080/02652048.2017.1296500.
19
[20] E. Ahani, T. Toliyat, M. Mahmoudi Rad, Comparing size particle, release study and cytotoxicity activity of PHMB encapsulated in different liposomal formulations: neutral and cationic liposomes, J. Bioeng. Res. 1 (2019) 1–6.
20
[21] E. AHANI, M. MONTAZER, A. RASHIDI, INVESTIGATION OF ANTI-BACTERIAL PROPERTIES OF WOOLEN FABRICS LOADED WITH PHMB (POLYHEXAMETHYLENE BIGUANIDE HYDROCHLORIDE), (n.d.).
21
[22] G. Singhvi, S. Patil, V. Girdhar, S.K. Dubey, Nanocarriers for topical drug delivery: approaches and advancements, Nanosci. Nanotechnology-Asia. 9 (2019) 329–336.
22
[23] S. Maleki Dizaj, S. Sharifi, A. Jahangiri, Electrospun nanofibers as versatile platform in antimicrobial delivery: Current state and perspectives, Pharm. Dev. Technol. 24 (2019) 1187–1199.
23
[24] T.G. Kebede, M.B. Seroto, R.C. Chokwe, S. Dube, M.M. Nindi, Adsorption of antiretroviral (ARVs) and related drugs from environmental wastewaters using nanofibers, J. Environ. Chem. Eng. (2020) 104049.
24
[25] F. Tuğcu-Demiröz, S. Saar, S. Tort, F. Acartürk, Electrospun Metronidazole-Loaded Nanofibers for Vaginal Drug Delivery, Drug Dev. Ind. Pharm. (2020) 1–37.
25
[26] V. Izadi, P.K. Shahri, H. Ahani, A compressed-sensing-based compressor for ECG, Biomed. Eng. Lett. (2020) 1–9.
26
[27] S.R. Surakanti, S.A. Khoshnevis, H. Ahani, V. Izadi, Efficient Recovery of Structrual Health Monitoring Signal based on Kronecker Compressive Sensing, Int. J. Appl. Eng. Res. 14 (2019) 4256–4261.
27
[28] M. Tavakoli, H. Ahani, Removing EOG Artifacts from EEG Signals Using a Modified Wavelet-RLS Method, J. Bioeng. Res. 2 (2020).
28
[29] V. Izadi, A.H. Ghasemi, P.K. Shahri, Negotiating the Steering Control Authority within Haptic Shared Control Framework, SAE Technical Paper, 2020.
29
[30] B. Albertini, N. Passerini, M. Di Sabatino, B. Vitali, P. Brigidi, L. Rodriguez, Polymer–lipid based mucoadhesive microspheres prepared by spray-congealing for the vaginal delivery of econazole nitrate, Eur. J. Pharm. Sci. 36 (2009) 591–601.
30
[31] M. Altındiş, F.G. Aslan, H. Uzuner, H. Ünal, M. Köroğlu, S. Kulac, A. Karadenizli, Comparison of antiviral effect of olive leaf extract and propolis with acyclovir on herpes simplex virus type 1, Mikrobiyol. Bul. 54 (2020) 79–94.
31
[32] W. Cui, X. Li, X. Zhu, G. Yu, S. Zhou, J. Weng, Investigation of drug release and matrix degradation of electrospun poly (DL-lactide) fibers with paracetanol inoculation, Biomacromolecules. 7 (2006) 1623–1629.
32