Number of Articles: 24
2. Characterization and Evaluation of Graphene Oxide Incorporated into Nanofibrous Scaffold for Bone Tissue Engineering

Volume 2, Issue 1, Winter 2019, Pages 1-13

Alireza Safaei Firoozabady; Amir Aidun; Reza Kowsari-Esfahan; Azadeh Allahyari

Characterization and Evaluation of Graphene Oxide Incorporated into Nanofibrous Scaffold for Bone Tissue Engineering


3. The Role of Hypoxia in Tumor Progression, Metastasis, and Effect on Tumour Microenvironment

Volume 2, Issue 2, Spring 2019, Pages 1-13

seyed bahram behzad; Feyzollahi Mirak Zoleykha

The Role of Hypoxia in Tumor Progression, Metastasis, and Effect on Tumour Microenvironment


4. Crystallographic study of hydrothermal synthesis of Hydroxyapatite nano-rods using Brushite precursors

Volume 2, Issue 3, Summer 2019, Pages 1-8

Hassan Nosrati; Rasoul Sarraf-Mamoory; Fatemeh Dabir

Crystallographic study of hydrothermal synthesis of Hydroxyapatite nano-rods using Brushite precursors


5. Physical evaluation of 3D-printed gelatin-hydroxyapatite-reduced graphene oxide nanocomposite as a bone tissue engineering scaffold

Volume 3, Issue 1, Winter 2020, Pages 1-11

Hassan Nosrati; Rasoul Sarraf-Mamoory; Dang Quang Svend Le; Maria Canillas Perez; Cody Eric Bunger

Physical evaluation of 3D-printed gelatin-hydroxyapatite-reduced graphene oxide nanocomposite as a bone tissue engineering scaffold


6. An Analysis of the Effectiveness of Cold Atmospheric Plasma Made in Iran in Regenerating Heat and Acid Burn Wounds

Volume 3, Issue 1, Winter 2020, Pages 12-20

Gholamreza Kaka; Jalal Esmaeili; Mohamad Mahdi Hadipour; sonia dadseresht; Mahdi Nazari; Ali Ebrahimi

An Analysis of the Effectiveness of Cold Atmospheric Plasma Made in Iran in Regenerating Heat and Acid Burn Wounds


8. Fabrication of polycaprolactone scaffold with gradient porous microstructure for bone tissue engineering

Volume 2, Issue 3, Summer 2019, Pages 9-17

Mahdokht Akbari Taemeh; Babak Akbari; Mojtaba Khorramnezhad; Jhamak nourmohammadi

Fabrication of polycaprolactone scaffold with gradient porous microstructure for bone tissue engineering


9. The effect of ethanol and temperature on the structural properties of mesoporous silica synthesized by sol-gel method

Volume 1, Issue 1, Autumn 2018, Pages 10-17

pegah khodaei; najmeh najmoddin; Shima Shahrad


11. Investigating Effect of Compression Stocks on Tissues of Legs

Volume 2, Issue 2, Spring 2019, Pages 14-20

Samaneh Nemati; Shahrokh Shojaei

Investigating Effect of Compression Stocks on Tissues of Legs


12. Effect of hydrogen gas pressure on the mechanical properties of reduced graphene oxide-HA nanocomposites

Volume 3, Issue 1, Winter 2020, Pages 21-30

Hassan Nosrati; Rasoul Sarraf-Mamoory; Amir Hossein Ahmadi; Dang Quang Svend Le; Maria Canillas Perez; Cody Eric Bunger

Effect of hydrogen gas pressure on the mechanical properties of reduced graphene oxide-HA nanocomposites


13. An Overview of Polyaniline in Tissue Engineering

Volume 2, Issue 4, Autumn 2019, Pages 0-0


14. Tissue Engineering in Lower Urinary Tract Reconstruction

Volume 1, Issue 1, Autumn 2018, Pages 18-24

Amir Aidun; Alireza Safaei Firoozabady; Mojtaba Teimoori; Arefeh ebrahimi hasani niaki; Elham Naseh


15. An antibacterial delivery system based on Eucalyptus camaldulensis loaded in starch microspheres

Volume 2, Issue 3, Summer 2019, Pages 18-28

Leila Sadeghzadeh; Mohammad Rafienia; Fatemeh Sefidkon; Parviz Owlia; Babak Negahdari; Shahin Bonakdar

An antibacterial delivery system based on Eucalyptus camaldulensis loaded in starch microspheres


16. Carbon Nanostructures; The Current Potential Applications In Tissue Engineering

Volume 2, Issue 2, Spring 2019, Pages 21-41

esmaeil biazar; masoumeh najafi s; saeed heidari k; meysam yazdankhah; Armin bahrami; erfan khalatbari; sara monajemi g; mahshad kamalvand

Carbon Nanostructures; The Current Potential Applications In Tissue Engineering


17. Fabrication of Nanocomposite Foam by Supercritical CO2 Technique For Application in Tissue Engineering

Volume 2, Issue 1, Winter 2019, Pages 23-32

Bahareh Kamyab Moghadas; Mohammad Azadi

Fabrication of Nanocomposite Foam by Supercritical CO2 Technique For Application in Tissue Engineering


18. Association Between Single Nucleotide Polymorphism rs113488022 of BRAF and Endometriosis in Iranian Population

Volume 1, Issue 1, Autumn 2018, Pages 25-31

Maryam Sadat Hoseini; Maryam Rashidnahal; Ahmad Ebrahimi; Gholamreza Javadi


19. Characterization of the precipitated Dicalcium phosphate dehydrate on the Graphene oxide surface as a bone cement reinforcement

Volume 2, Issue 1, Winter 2019, Pages 33-46

Hassan Nosrati; Dang Quang Svend Le; Reza Zolfaghari Emameh; Cody Eric Bunger

Characterization of the precipitated Dicalcium phosphate dehydrate on the Graphene oxide surface as a bone cement reinforcement


20. Decellularized lung tissue enhanced mesenchymal stem cells proliferation and differentiationn

Volume 2, Issue 2, Spring 2019, Pages 42-47

morvarid ebadi; Sarah Rajabi; sara soleimani asl

Decellularized lung tissue enhanced mesenchymal stem cells proliferation and differentiationn


21. Encapsulation of Theophylline in Poly (vinyl alcohol) using Electrospraying Method

Volume 1, Issue 1, Autumn 2018, Pages 32-39

Zahra Aminipour; Zahra Kolouei; Shabnam Tohidi; Shahin Bonakdar

Encapsulation of Theophylline in Poly (vinyl alcohol) using Electrospraying Method


22. Preparation of Skin Tissue Engineering Scaffold Based on Adipose-Derived Tissue

Volume 2, Issue 1, Winter 2019, Pages 47-54

Sanaz Samani; Mohammad Ali Shokrgozar; Arash Zamini; Mohammad Majidi; Hossein Tavassoli; Amir Aidun; Shahin Bonakdar

Preparation of Skin Tissue Engineering Scaffold Based on Adipose-Derived Tissue


23. Optimum spacer removal and sintering temperature for porous magnesium scaffold fabrication

Volume 2, Issue 2, Spring 2019, Pages 48-57

Mohammad Khodaei; Saeid Toghyani

Optimum spacer removal and sintering temperature for porous magnesium scaffold fabrication


24. Nanoclay Reinforced Starch-Polycaprolactone Scaffolds for Bone Tissue Engineering

Volume 2, Issue 1, Winter 2019, Pages 55-63

maryam jamshidi; Babak Akbari; Jhamak Nourmohammadi

Nanoclay Reinforced Starch-Polycaprolactone Scaffolds for Bone Tissue Engineering