Author Index

A

  • Ahmadi, Amir Hossein Effect of hydrogen gas pressure on the mechanical properties of reduced graphene oxide-HA nanocomposites [Volume 3, Issue 1, 2020, Pages 21-30]
  • Ahmadi, Amir Hossein Synthesis polyurethane closed cell foam via chemical method [Volume 3, Issue 2, 2020]
  • Ahmadi, Amir Hossein Preparation and characterization of SiC/SiO2 coating by a sol–gel method [Volume 3, Issue 2, 2020]
  • Aidun, Amir Tissue Engineering in Lower Urinary Tract Reconstruction [Volume 1, Issue 1, 2018, Pages 18-24]
  • Aidun, Amir Characterization and Evaluation of Graphene Oxide Incorporated into Nanofibrous Scaffold for Bone Tissue Engineering [Volume 2, Issue 1, 2019, Pages 1-13]
  • Aidun, Amir Preparation of Skin Tissue Engineering Scaffold Based on Adipose-Derived Tissue [Volume 2, Issue 1, 2019, Pages 47-54]
  • Akbari, Babak Nanoclay Reinforced Starch-Polycaprolactone Scaffolds for Bone Tissue Engineering [Volume 2, Issue 1, 2019, Pages 55-63]
  • Akbari, Babak Fabrication of polycaprolactone scaffold with gradient porous microstructure for bone tissue engineering [Volume 2, Issue 3, 2019, Pages 9-17]
  • Akbari Taemeh, Mahdokht Fabrication of polycaprolactone scaffold with gradient porous microstructure for bone tissue engineering [Volume 2, Issue 3, 2019, Pages 9-17]
  • Allahyari, Azadeh Characterization and Evaluation of Graphene Oxide Incorporated into Nanofibrous Scaffold for Bone Tissue Engineering [Volume 2, Issue 1, 2019, Pages 1-13]
  • Aminipour, Zahra Encapsulation of Theophylline in Poly (vinyl alcohol) using Electrospraying Method [Volume 1, Issue 1, 2018, Pages 32-39]
  • Arabi, Neda Experimental and analytical study of novel rapid freeze casting technique to fabricate 3D-shaped gelatin nanofibers [Volume 1, Issue 1, 2018, Pages 1-9]
  • Azadi, Mohammad Fabrication of Nanocomposite Foam by Supercritical CO2 Technique For Application in Tissue Engineering [Volume 2, Issue 1, 2019, Pages 23-32]

B

  • Bonakdar, Shahin Encapsulation of Theophylline in Poly (vinyl alcohol) using Electrospraying Method [Volume 1, Issue 1, 2018, Pages 32-39]
  • Bonakdar, Shahin Preparation of Skin Tissue Engineering Scaffold Based on Adipose-Derived Tissue [Volume 2, Issue 1, 2019, Pages 47-54]
  • Bonakdar, Shahin An antibacterial delivery system based on Eucalyptus camaldulensis loaded in starch microspheres [Volume 2, Issue 3, 2019, Pages 18-28]
  • Bunger, Cody Eric Characterization of the precipitated Dicalcium phosphate dehydrate on the Graphene oxide surface as a bone cement reinforcement [Volume 2, Issue 1, 2019, Pages 33-46]
  • Bunger, Cody Eric Physical evaluation of 3D-printed gelatin-hydroxyapatite-reduced graphene oxide nanocomposite as a bone tissue engineering scaffold [Volume 3, Issue 1, 2020, Pages 1-11]
  • Bunger, Cody Eric Effect of hydrogen gas pressure on the mechanical properties of reduced graphene oxide-HA nanocomposites [Volume 3, Issue 1, 2020, Pages 21-30]

C

  • Canillas Perez, Maria Physical evaluation of 3D-printed gelatin-hydroxyapatite-reduced graphene oxide nanocomposite as a bone tissue engineering scaffold [Volume 3, Issue 1, 2020, Pages 1-11]
  • Canillas Perez, Maria Effect of hydrogen gas pressure on the mechanical properties of reduced graphene oxide-HA nanocomposites [Volume 3, Issue 1, 2020, Pages 21-30]

D

  • Dabir, Fatemeh Crystallographic study of hydrothermal synthesis of Hydroxyapatite nano-rods using Brushite precursors [Volume 2, Issue 3, 2019, Pages 1-8]

E

  • Ebrahimi, Ahmad Association Between Single Nucleotide Polymorphism rs113488022 of BRAF and Endometriosis in Iranian Population [Volume 1, Issue 1, 2018, Pages 25-31]
  • Ebrahimi, Ali An Analysis of the Effectiveness of Cold Atmospheric Plasma Made in Iran in Regenerating Heat and Acid Burn Wounds [Volume 3, Issue 1, 2020, Pages 12-20]
  • Esmaeili, Jalal An Analysis of the Effectiveness of Cold Atmospheric Plasma Made in Iran in Regenerating Heat and Acid Burn Wounds [Volume 3, Issue 1, 2020, Pages 12-20]

G

  • Gharabeik, Mohammad Reza Synthesis polyurethane closed cell foam via chemical method [Volume 3, Issue 2, 2020]
  • Gharabeik, Mohammad Reza Preparation and characterization of SiC/SiO2 coating by a sol–gel method [Volume 3, Issue 2, 2020]
  • Ghorbani, Farnaz Experimental and analytical study of novel rapid freeze casting technique to fabricate 3D-shaped gelatin nanofibers [Volume 1, Issue 1, 2018, Pages 1-9]

H

  • Hadipour, Mohamad Mahdi An Analysis of the Effectiveness of Cold Atmospheric Plasma Made in Iran in Regenerating Heat and Acid Burn Wounds [Volume 3, Issue 1, 2020, Pages 12-20]
  • Haghjoo, Roghayeh Improved Biomedical Properties of Chitosan/Alginate Composites by Chemical Immobilization of Gelatin layer [Volume 2, Issue 1, 2019, Pages 14-22]
  • Hoseini, Maryam Sadat Association Between Single Nucleotide Polymorphism rs113488022 of BRAF and Endometriosis in Iranian Population [Volume 1, Issue 1, 2018, Pages 25-31]

J

  • Javadi, Gholamreza Association Between Single Nucleotide Polymorphism rs113488022 of BRAF and Endometriosis in Iranian Population [Volume 1, Issue 1, 2018, Pages 25-31]

K

  • Kaka, Gholamreza An Analysis of the Effectiveness of Cold Atmospheric Plasma Made in Iran in Regenerating Heat and Acid Burn Wounds [Volume 3, Issue 1, 2020, Pages 12-20]
  • Kamyab Moghadas, Bahareh Fabrication of Nanocomposite Foam by Supercritical CO2 Technique For Application in Tissue Engineering [Volume 2, Issue 1, 2019, Pages 23-32]
  • Karkhaneh, Akbar Improved Biomedical Properties of Chitosan/Alginate Composites by Chemical Immobilization of Gelatin layer [Volume 2, Issue 1, 2019, Pages 14-22]
  • Khodaei, Mohammad Optimum spacer removal and sintering temperature for porous magnesium scaffold fabrication [Volume 2, Issue 2, 2019, Pages 48-57]
  • Khorramnezhad, Mojtaba Fabrication of polycaprolactone scaffold with gradient porous microstructure for bone tissue engineering [Volume 2, Issue 3, 2019, Pages 9-17]
  • Kolouei, Zahra Encapsulation of Theophylline in Poly (vinyl alcohol) using Electrospraying Method [Volume 1, Issue 1, 2018, Pages 32-39]
  • Kowsari-Esfahan, Reza Characterization and Evaluation of Graphene Oxide Incorporated into Nanofibrous Scaffold for Bone Tissue Engineering [Volume 2, Issue 1, 2019, Pages 1-13]

L

  • Le, Dang Quang Svend Physical evaluation of 3D-printed gelatin-hydroxyapatite-reduced graphene oxide nanocomposite as a bone tissue engineering scaffold [Volume 3, Issue 1, 2020, Pages 1-11]

M

  • Majidi, Mohammad Preparation of Skin Tissue Engineering Scaffold Based on Adipose-Derived Tissue [Volume 2, Issue 1, 2019, Pages 47-54]

N

  • Naseh, Elham Tissue Engineering in Lower Urinary Tract Reconstruction [Volume 1, Issue 1, 2018, Pages 18-24]
  • Nazari, Mahdi An Analysis of the Effectiveness of Cold Atmospheric Plasma Made in Iran in Regenerating Heat and Acid Burn Wounds [Volume 3, Issue 1, 2020, Pages 12-20]
  • Negahdari, Babak An antibacterial delivery system based on Eucalyptus camaldulensis loaded in starch microspheres [Volume 2, Issue 3, 2019, Pages 18-28]
  • Nemati, Samaneh Investigating Effect of Compression Stocks on Tissues of Legs [Volume 2, Issue 2, 2019, Pages 14-20]
  • Nosrati, Hassan Characterization of the precipitated Dicalcium phosphate dehydrate on the Graphene oxide surface as a bone cement reinforcement [Volume 2, Issue 1, 2019, Pages 33-46]
  • Nosrati, Hassan Crystallographic study of hydrothermal synthesis of Hydroxyapatite nano-rods using Brushite precursors [Volume 2, Issue 3, 2019, Pages 1-8]
  • Nosrati, Hassan Physical evaluation of 3D-printed gelatin-hydroxyapatite-reduced graphene oxide nanocomposite as a bone tissue engineering scaffold [Volume 3, Issue 1, 2020, Pages 1-11]
  • Nosrati, Hassan Effect of hydrogen gas pressure on the mechanical properties of reduced graphene oxide-HA nanocomposites [Volume 3, Issue 1, 2020, Pages 21-30]
  • Nosrati, Hassan Synthesis polyurethane closed cell foam via chemical method [Volume 3, Issue 2, 2020]
  • Nosrati, Hassan Preparation and characterization of SiC/SiO2 coating by a sol–gel method [Volume 3, Issue 2, 2020]
  • Nourmohammadi, Jhamak Nanoclay Reinforced Starch-Polycaprolactone Scaffolds for Bone Tissue Engineering [Volume 2, Issue 1, 2019, Pages 55-63]

O

  • Owlia, Parviz An antibacterial delivery system based on Eucalyptus camaldulensis loaded in starch microspheres [Volume 2, Issue 3, 2019, Pages 18-28]

Q

  • Quang Svend Le, Dang Characterization of the precipitated Dicalcium phosphate dehydrate on the Graphene oxide surface as a bone cement reinforcement [Volume 2, Issue 1, 2019, Pages 33-46]
  • Quang Svend Le, Dang Effect of hydrogen gas pressure on the mechanical properties of reduced graphene oxide-HA nanocomposites [Volume 3, Issue 1, 2020, Pages 21-30]

R

  • Rafienia, Mohammad An antibacterial delivery system based on Eucalyptus camaldulensis loaded in starch microspheres [Volume 2, Issue 3, 2019, Pages 18-28]
  • Rajabi, Sarah Decellularized lung tissue enhanced mesenchymal stem cells proliferation and differentiationn [Volume 2, Issue 2, 2019, Pages 42-47]
  • Rashidnahal, Maryam Association Between Single Nucleotide Polymorphism rs113488022 of BRAF and Endometriosis in Iranian Population [Volume 1, Issue 1, 2018, Pages 25-31]

S

  • Sadeghzadeh, Leila An antibacterial delivery system based on Eucalyptus camaldulensis loaded in starch microspheres [Volume 2, Issue 3, 2019, Pages 18-28]
  • Safaei Firoozabady, Alireza Tissue Engineering in Lower Urinary Tract Reconstruction [Volume 1, Issue 1, 2018, Pages 18-24]
  • Safaei Firoozabady, Alireza Characterization and Evaluation of Graphene Oxide Incorporated into Nanofibrous Scaffold for Bone Tissue Engineering [Volume 2, Issue 1, 2019, Pages 1-13]
  • Samani, Sanaz Preparation of Skin Tissue Engineering Scaffold Based on Adipose-Derived Tissue [Volume 2, Issue 1, 2019, Pages 47-54]
  • Sarraf-Mamoory, Rasoul Crystallographic study of hydrothermal synthesis of Hydroxyapatite nano-rods using Brushite precursors [Volume 2, Issue 3, 2019, Pages 1-8]
  • Sarraf-Mamoory, Rasoul Physical evaluation of 3D-printed gelatin-hydroxyapatite-reduced graphene oxide nanocomposite as a bone tissue engineering scaffold [Volume 3, Issue 1, 2020, Pages 1-11]
  • Sarraf-Mamoory, Rasoul Effect of hydrogen gas pressure on the mechanical properties of reduced graphene oxide-HA nanocomposites [Volume 3, Issue 1, 2020, Pages 21-30]
  • Sefidkon, Fatemeh An antibacterial delivery system based on Eucalyptus camaldulensis loaded in starch microspheres [Volume 2, Issue 3, 2019, Pages 18-28]
  • Shahrad, Shima The effect of ethanol and temperature on the structural properties of mesoporous silica synthesized by sol-gel method [Volume 1, Issue 1, 2018, Pages 10-17]
  • Shojaei, Shahrokh Investigating Effect of Compression Stocks on Tissues of Legs [Volume 2, Issue 2, 2019, Pages 14-20]
  • Shokrgozar, Mohammad Ali Preparation of Skin Tissue Engineering Scaffold Based on Adipose-Derived Tissue [Volume 2, Issue 1, 2019, Pages 47-54]

T

  • Tavassoli, Hossein Preparation of Skin Tissue Engineering Scaffold Based on Adipose-Derived Tissue [Volume 2, Issue 1, 2019, Pages 47-54]
  • Teimoori, Mojtaba Tissue Engineering in Lower Urinary Tract Reconstruction [Volume 1, Issue 1, 2018, Pages 18-24]
  • Toghyani, Saeid Optimum spacer removal and sintering temperature for porous magnesium scaffold fabrication [Volume 2, Issue 2, 2019, Pages 48-57]
  • Tohidi, Shabnam Encapsulation of Theophylline in Poly (vinyl alcohol) using Electrospraying Method [Volume 1, Issue 1, 2018, Pages 32-39]

Z

  • Zamanian, Ali Experimental and analytical study of novel rapid freeze casting technique to fabricate 3D-shaped gelatin nanofibers [Volume 1, Issue 1, 2018, Pages 1-9]
  • Zamini, Arash Preparation of Skin Tissue Engineering Scaffold Based on Adipose-Derived Tissue [Volume 2, Issue 1, 2019, Pages 47-54]
  • Zoleykha, Feyzollahi Mirak The Role of Hypoxia in Tumor Progression, Metastasis, and Effect on Tumour Microenvironment [Volume 2, Issue 2, 2019, Pages 1-13]
  • Zolfaghari Emameh, Reza Characterization of the precipitated Dicalcium phosphate dehydrate on the Graphene oxide surface as a bone cement reinforcement [Volume 2, Issue 1, 2019, Pages 33-46]